UNIVERSITY HELP DESK

On-Campus Network - ResNet: Florida

Accessing ResNet Depending on your residence hall location, you may need a computer with a network card, a wireless card or a modem and a "Y" phone jack splitter. Please refer to the specific section for your residence hall for more information. Network cards and wireless cards can be purchased in the University Bookstore.

Please note: personal wireless access points are not allowed in dorm rooms via the wall jack connection due to the security risk. Please call the University Help Desk with any questions.

tropical pointe and lakeside towers To access the University's Residential Network with your personal computer, you must have a network card and a network cable. Locate the network wall plate and plug your computer's network cable into the network plug.

In some rooms there may be more networking devices requiring network connectivity than there are jacks in the room. You can solve this problem with an Ethernet hub or a switch, which are special devices that allow several networking devices to share a single data network jack.

It is necessary to make some adjustments to your computer in order to access ResNet. If you have an operating system other than Windows XP or you are having difficulty locating your data drop, please contact the University Help Desk for assistance.

windows xp

  1. Click on Start and then Control Panel.
  2. Click Network and Internet Connections and then Network Connections.
  3. Right-click Local Area Connection and select Properties.
  4. Select the Internet Protocol (TCP/IP) option and then click Properties.
  5. Make sure the following settings are selected:
    • Obtain an IP address automatically.
    • Obtain DNS server address automatically.
  6. Click the "Advanced" button.
  7. Click the DNS tab and ensure the settings are:
    • DNS Server Address: Blank.
    • Select "Append primary and connection specific DNS suffixes."
    • Check "Append parent suffixes of the primary DNS suffix."
    • Check "Register this connection's address in DNS."
  8. Click the WINS tab and ensure the settings are:
    • WINS address box: Blank.
    • Check "Enable LMHOSTS lookup."
    • Select "Use NetBIOS setting from the DHCP server."
  9. Click OK to Advanced TCP/IP settings.
  10. Click OK to Internet Protocol (TCP/IP) Properties.
  11. Click OK to Local Area Connection Properties.
  12. Close the Network and Dial-Up Connections box.

windows vista

  1. Right Click on the Start button and select properties then switch to classic view.
  2. Click on Start and then Settings and then Network Connections
  3. Right-click Local Area Connection and select Properties.
  4. Select the Internet Protocol (TCP/IP Version 4) option and then click Properties.
  5. Make sure the following settings are selected:
    1. Obtain an IP address automatically.
    2. Obtain DNS server address automatically.
  6. Click the "Advanced" button.
  7. Click the DNS tab and ensure the settings are:
    1. DNS Server Address: Blank.
    2. Select "Append primary and connection specific DNS suffixes."
    3. Check "Append parent suffixes of the primary DNS suffix."
    4. Check "Register this connection's address in DNS."
  8. Click the WINS tab and ensure the settings are:
    1. WINS address box: Blank.
    2. Check "Enable LMHOSTS lookup."
    3. Select "Use NetBIOS setting from the DHCP server."
  9. Click OK to Advanced TCP/IP settings.
  10. Click OK to Internet Protocol (TCP/IP) Properties.
  11. Click Close to Local Area Connection Properties.
  12. Close the Network Connections box.

clean access - J&W has implemented a new network authentication and validation security system called Clean Access to prevent infected computers from accessing the network and infecting other computers. This will ensure a safe, secure and reliable network for you.

What Clean Access does:

The first time you connect your computer to a live data jack in your room and launch your browser, you will be redirected to a page for downloading the Clean Access Agent. Once Clean Access is installed, you will not be redirected to this page again. Instead, every time Windows is restarted, the Clean Access Agent will present you with a pop-up to log into the University network using your J&W email ID and password.

(Note: If the Clean Access Agent does not automatically download when you launch your browser, you can manually download the Cisco Clean Access Agent)

Upon successful authentication, the Clean Access Agent will check your computer to make sure it passes the following requirements:

If your computer passes these requirements, you will be granted access to the network. If your computer does not meet these requirements, you will be granted temporary access to specific Web sites where you can fulfill the requirements and/or instructions on how to get them from related websites. Once your computer passes all of the requirements, you will be able to access all network services and the Internet.

Clean Access installation instructions (188K PDF) in order to connect to the J&W residential network.

arch creek,flamingo hall, biscayne commons and palm gardens These residence halls offer wireless connectivity only. A WiFi compliant wireless card is needed for access. To access the wireless network, install your wireless card, open a web browser and follow the instructions listed there.

emerald lake The University does not offer access to the University ResNet from these locations at this time. You can still participate in email discussions with faculty and students as well as Internet email and access uconnect from any other Internet Service Provider connection through your phone line. You are responsible for all charges. Your computer must have a dial-up modem (for some software needs to be a 56.6 Kbps modem), Internet communications software (which is typically included on newer computers) and you may want to use a "Y" splitter for the telephone jack to split the line for your computer and the phone.

© 2002 Johnson & Wales University. All rights reserved.

up